RadBeacon 1.2
Device: Mac OS
Category: Utilities
Price: Free, Version: 1.0 -> 1.2 (iTunes)
Description:The RadBeacon app is the configuration utility for RadBeacon proximity beacons from Radius Networks.
With the RadBeacon app you can scan for nearby, configurable Radius Networks beacons. Once discovered, you can display each beacon's operating settings and make modifications to those settings.
Scanning for RadBeacons
Scan for nearby configurable RadBeacons by swiping down on the RadBeacons table. Each beacon discovered is displayed with the following attributes
- Device Name
- Device Mdel
- Device ID
Reviewing RadBeacon Settings
Select any RadBeacon in the table to view it's detailed settings. The settings displayed include:
- Device Name
- Advertised UUID Identifier
- Advertised Major Identifier
- Advertised Minor Identifier
- Advertised Power Value
- Advertising Rate Setting
- Advertising Transmit Power Setting
Updating RadBeacon Settings
Change any of the modifiable settings, press Apply and submit a valid PIN to update the settings for this beacon.
Resetting to Factory Settings
Reset the device to the original factory settings.
Updating RadBeacon PIN
Submit a new and existing PIN to update the PIN for a beacon.
Lock RadBeacon Settings
Prevent any further connections from remote Bluetooth 4.0 devices to the beacon configuration service. The Lock feature is a security precaution to limit the possibility of third party manipulation of your RadBeacons once they have been installed and configured. In order to re-enter configurable mode, remove and restore power to the RadBeacon. Once power has been restored your RadBeacon will remain in configurable mode for 30 minutes or until you lock the device again.
Boot To DFU
Reboot the RadBeacon into Direct Firmware Update mode. Contact Radius Networks support for information on the procedure for firmware update or replacement. In order to re-enter normal operational model, simply remove and replace power to the device.
What's New
Support for RadBeacon USB proximity beacon firmware version 2.0.
RadBeacon